$1,929.99 each

TCI TH400 Reverse Manual Valve Body Transmission

Automatic Transmission, Reverse Shift Pattern, Manual Valve Body, Trans Brake, Chevy, TH400 212500

$6,159.99 each

6X Six Speed Transmission Package; GM Bellhousing

Using the latest developments in drivetrain technology, TCI has developed an innovative automatic transmission for Pro Touring, street and all-out race vehicles. 271600P2

$5,779.99 each

TCI 6-Speed GM 4L80E

271600 TCI 6x 6-Speed GM 4L80E Automatic Transmissions 271600

$264.99 each

TCI SFI Spec LS1 Flexplate 4.8/5.3/5.7/6.0L

LS1 Flexplate GM Cars-Trucks 168 Tooth 4.8/5.3/5.7/6.0L 399753

$849.99 each

Custom Built - Vigilante GM Torque Converter 9.5" Single Disc Lock Up

PI-V-SDLU Custom Built Vigilante GM Torque Converter 9.5" Single Disc Lock-Up 2004R, 700R4, 4L60E, 4L80E, 6L80E 2400-6000 RPM's

$435.99 each

TCI 4L60E Breakaway Torque Converter 2200 Stall


These TCI Breakaway torque converters will give you about 1,000 more rpm stall speed than stock, so you'll launch and accelerate faster. 242948

$979.99 each

TCI 4L60E Super Street Fighter Torque Converter with Billet Cover, 3000-3200 Stall


1998-02 F-body LS1/LS2 applications and 1999-06 trucks w/ 4.8L, 5.3L and 6.0L engines. Will not fit 1997-05 Corvette. Flexplate must be drilled for 7/16 in. bolts.

These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide. #242937

$394.99 each

TCI 4L60E/4L65E Breakaway Torque Converter LS1 Lock-up 2400-2600 Stall


Looking for improved performance from your LS-equipped road racing or high performance street transmission? If so, the TCI 4L60E Breakaway Torque Converter could be just the performance upgrade you’ve been looking for, providing efficiency at highway cruising speedand a quick, hard launch at wide open throttle. The 2400 to 2600 RPM flash stall speed converter still maintains excellent part throttle drivability. This converter is a direct, bolt-in replacement component and will fit any LS-based engine running a 4L60E transmission. A full four pounds lighter than the factory 4L60E torque converter, the TCI Breakaway Converter reduces the parasitic horsepower loss commonly found with the stock unit. Best of all, the added woven carbon fiber clutch lining used by TCI is the best material you can buy to deliver a more secure lock-up and more efficient delivery of power to the rear wheels.

The TCI 4L60E Breakaway Torque Converter features fully furnace-brazed fins and super smooth needle bearings to reduce internal friction and deliver added strength. One final major feature of the converter is the Heat Dissipating Technology™ (HDT) Coating, which reduces the overall operating temperature of the converter for better performance and durability.

Fits 1998-up 4L60E F-body LS1 applications; 1999-up GM 4L60E/4L65E trucks with 4.8, 5.3, 6.0 engines. #242938

$639.99 each

TCI 4L60E/4L65E Super Streetfighter Torque Converter LS1 Lock-up 4000-4200 Stall


The Super StreetFighter Torque Converter has all of the same features of the StreetFighter, but offers higher stall speeds for high performance street/strip vehicles.
Features: Furnace-brazed fins, needle bearings thrust washers, hardened pre-ground hub, computer balanced
Benefits: High torque multiplication, higher RPM launches, lower elapsed times, 2000+ stall speed increases over stock

98' & Later LS1 Applications, carbon-fiber TCC, does not fit Corvette, built with impeller (pump) side anti-ballooning plate and features a 4000 RPM Stall. #242939

$599.99 each

TCI 4L60E/ 4L65E LS1 Torque Converter Super StreetFighter Lock-up 3500-3700 Stall


1998-02 F-body LS1/LS2 applications and 1999-06 trucks w/ 4.8L, 5.3L and 6.0L engines. Will not fit 1997-05 Corvette. Bolts included.

These TCI Super StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub. Super StreetFighters provide the ultimate street performance with a stall speed of up to 4,000 rpm and competition-style launches. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.
242932


$759.99 each

TCI TH350/400 Ultimate StreetFighter w/ Anti-Ballon Plate 3500-3800 stall


Bridging the gap between our full competition series units and our Super StreetFighter converters, the Ultimate StreetFighter™ series of torque converters is designed specifically for extreme street machines.

Features: Furnace-brazed & hand welded fins, cast steel stator, needle bearings, dual bolt pattern, hardened pre-ground pump hub, computer balanced, installation hardware included

Benefits: High torque multiplication, higher RPM launches, lower elapsed times, suited for street/strip applications up to 1200 HP

With heavy-duty front anti-ballooning plate for nitrous applications and with a low stall configuration.
br> 241004


$10.25 each

ARP LS1/LS6 Torque Converter Bolts M10x1.5 4l60,4l80 230-7304

ARP LS1/LS6 Torque Converter Bolts M10x1.5 4l60,4l80 - #230-7304

$506.99 each

TCI TH350/TH400 Super Street Fighter Torque Converter w/ Anti-Balloning Plate 3500-3800 stall


The Super StreetFighter™ Torque Converter has all of the same features of the StreetFighter®, but offers higher stall speeds for high performance street/strip vehicles.
Features: Furnace-brazed fins, needle bearings thrust washers, hardened pre-ground hub, computer balanced Benefits: High torque multiplication, higher RPM launches, lower elapsed times, 2000+ stall speed increases over stock

Flexplate must be drilled for 7/16" bolts
br>
241002


$465.99 each

TCI TH350/TH400 Street Fighter Torque Converter w/ Anti-Balloning Plate 3000-3400 stall


Designed with the street/strip application in mind, this torque converter benefits more radically prepared street machines (those with performance cams, aftermarket carbs and higher compression ratios) to bring the launch RPM in line with the performance enhancements. The StreetFighter lets you take advantage of horsepower gains found in higher RPM ranges.

Features: Furnace-brazed fins, needle bearings, hardened pre-ground pump hub, computer balanced, installation hardware included

Benefits: Higher RPM launches, quicker reaction times, lower elapsed times, better low- and mid-range power, 1500+ RPM increase in stall over stock.

With heavy-duty front anti-ballooning plate for nitrous applications.

241001


$327.99 each

TCI TH350/TH400 Breakaway Torque Converter w/ Anti-Balloning Plate 2200-2400 stall


The first step into serious high performance, the Breakaway is a great torque converter for moderately modified street machines and weekend racers also used as daily drivers. It provides approximately 2400 to 2600 RPM flash stall without negatively affecting part throttle driving. Designed for efficiency at highway cruising speeds and to launch hard at wide open throttle, the Breakaway® is a fantastic all-around torque converter.

Features: Furnaced-brazed fins, needle bearings, hardened pre-ground pump hub, computer balanced

Benefits: Harder launches, quicker acceleration, improved low end power, bolt-in (no modifications required), 1,000+ RPM increase in stall over stock

With heavy-duty front anti-ballooning plate for nitrous applications.

Fits TH350/TH400 with dual bolt pattern (168-tooth flexplate).

240901


$335.99 each

Ram LS1 Muscle Car Clutch


92931 Ram LS1 Muscle Car Clutch

Input Spline Quantity:26
Input Shaft Diameter:1.125 in.
Disc Diameter (in):11.000 in.
Disc Diameter (mm):279mm
Disc Material:Organic
Throwout Bearing Included:No


Ram Muscle Car clutch sets are ideal for vehicles with bolt-on mods and musclecar restorations where drivability is the most important factor. Muscle Car series clutch sets utilize pressure plates with increased clamping loads, plus clutch discs with an organic friction material, for smooth engagement and drivability.

$1,149.99 each

Custom Built - Vigilante GM Torque Converter 9.5" Triple Disc Lock Up

PI-V-3DLU Custom Built Vigilante GM Torque Converter 9.5" Triple Disc Lock-Up 2004R, 700R4, 4L60E, 4L80E, 6L80E 2400-6000 RPM's

$589.99 each

TCI EZ-TCU 4L60E/4L80E Stand Alone Controller

These TCI EZ-TCU automatic transmission controllers are fully configured right out of the box--no tuning is necessary. 302820

Results 1 - 18 of 18

Financing Available

Financing Available