Fuel Pumps & Regulators
$6,507.87 each

Edelbrock E-Force Camaro SS Supercharger Street Legal Kits 15980

Supercharger, Eaton Gen VI, Serpentine, Black, Intercooler, Chevy, 6.2L LS3, Manual, Kit

$6,507.87 each

Edelbrock E-Force Camaro SS Supercharger Street Legal Kits 15970

Supercharger, E-Force, Eaton Gen VI, Serpentine, Black, Intercooler, Chevy, 6.2L LS, Automatic, Kit

$649.99 each

Aeromotive Dual Phantom with twin 340 LPH pumps

Today’s aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive has accepted this challenge and hurdles past them with the latest addition to the Phantom line: the Dual Phantom.

$425.99 each

Phantom 340 Stealth Fuel System

Considering a switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot rodding has been plagued by fuel delivery. The question is always, what do I do for a tank? Up until now, it’s been one of three options. Weld in a sump to your tank, go with a fuel cell or pay for a custom tank. Well, not any more. Aeromotive’s Phantom Fuel System gives you the option to put a high performance fuel pump inside virtually any fuel tank, including your factory tank.

Simply cut a hole in you tank. Measure the depth. Cut you pump hanger bracket to length and your baffle / basket foam. Insert the baffle. Install the retainer ring and gasket. Bolt your pump and hanger down. That’s it. Now you have a fuel pump inside your factory tank capable of supporting big horsepower EFI or Carbureted and its whisper quiet.

No more welding sumps or using up trunk space with fuel cells. No more hot fuel handling issues like vapor-lock and no more fuel slosh. The Phantom system’s internal baffle / basket controls fuel slosh and keeps the fuel pump submerged in fuel, even at low fuel levels and in aggressive driving. The best part about this whole system… its completely universal. This system will fit virtually any tank from 5.5” deep to 11” deep, plastic, steel, aluminum, corrugated or smooth. One system that gives you everything you need to fuel your ride. Its serious performance you will never know is there!

$95.99 each

Phantom Wiring Kit

Parts included in kit:
1ea 30 Amp 12 VDC Automotive Relay
1ea 30 Amp 12 VDC Circuit Breaker
2ea Yellow Insulated Butt Connector
2ea Yellow Ring Connector for #10 Stud
1ea Yellow Ring Connector for 3/8” Stud
18ft 10ga. Fuel Pump Power/Ground Wire
4ft 10ga. Red + Battery Wire
10ft 16ga. Red Trigger Wire
1ft 10ga. Black Ground Wire
12ea 6 inch cable ties
3ea Self-Drilling Screws
Tools required for installation:
Electrical terminal crimping tool
5/16” nut driver

$1,438.97 each

A1000 Carbureted Fuel System (single carb)

If you’re tired of fuel delivery problems, Aeromotive has the fuel system solution you’ve been looking for. Designed to provide outstanding performance through matched component selection and correct installation, these systems offer the results only years of engineering experience can provide, while eliminating confusion, wasted time and unnecessary expense.

This system includes everything needed for a complete Aeromotive system installation in a carbureted application. All systems include fuel pump, filters, regulator, port fittings, stainless steel braided hose, hose-ends, wiring and installation hardware.

$40.00 each

0-100 psi Fuel Pressure gauge

• Fuel Pressure Gauge
• 1.5'' Diameter
• 0-100 PSI
• Liquid Filled
• Includes integral pressure relief valve.

$42.95 each

0-15 psi Fuel Pressure Gauge

• Fuel Pressure Gauge
• 1.5'' Diameter
• 0-15 PSI
• Liquid Filled
• Includes integral pressure relief valve

$787.97 each

99-04 5.4L Lightning/Harley Fuel Rail System

Each Fuel Rail System provides a custom engineered installation solution. Featuring CNC-Machined Billet Fuel Rails and custom mounting brackets as well as all the necessary components and accessories required to perform a complete installation, in one box.

Fits 1999-2004 5.4L Ford Lightning & Harley - Return-Style System

Each Billet Fuel Rail System is comprised of:
• High Flow, CNC-machined, Billet Fuel Rails with custom, steel mounting brackets.
• Billet Adjustable Regulator or Fuel Pressure Sensor Adapter.
• All necessary ORB-Port fittings with O-rings, and Billet Aluminum, AN-hose ends.
• Stainless Steel braided fuel lines.
• Custom OEM fuel supply and return line adapter fittings, as required.

$579.00 each

LS1,LS2,LS6 Fabricated Aluminum Intake Manifold With Rails

Top Street Performance high performance fabricated aluminum single plane intake manifolds are what is needed to squeeze the most horsepower out of a LS engine. They feature a large center plenum and short runners to improve air flow over the stock intake. Individual port O-rings promotes a good seal on every intake runner.

Results 1 - 10 of 10

Financing Available

Financing Available